1 thought on “What are the skills of catching doll machines?”
Phyllis
Universal skills 1. The so -called choice of a doll machine to choose a doll machine is to observe the location of the doll in the machine. The principle of the nearest principle should be found. There is no squeezing around the lying, and the baffle is basically not tight to the baffle or glass. 2, the countdown of time is over, and naturally falls. Generally, the doll machine will have countdown with a period of 30 seconds. It is found that when the countdown is over, the probability of success in the natural whereabouts of the paw is relatively high. When the claws naturally getting the doll, this opportunity is very important. 3, the test claw force starts to invest one or two to try the strength of the claws, that is, after the coin is invested, shake the hand rod that controls the direction, and the swing of the paw is not large. If the shaking is very powerful, the weak claws are more difficult to grab. If the shaking is not powerful, even the straightforward is not much, the probability of success is relatively high. 4, do not catch the doll with the center of gravity. Many times, when we did not catch the doll, as soon as the paws were delivered, the doll was not the original posture. Because the doll is down or vertically, it is difficult to judge the center of gravity, and it will also reduce the probability of the success of the claw card doll. The expansion information The minimum requirements for the height of the stacking height of the dolls of the doll 1. This is the environmental condition that can be used to use spring claw skills, because the height of the hole baffle is more than doubled than the doll, and the chance of dolls from being thrown out is small. 2, the size of the doll should match the size of the paw. Yes, this one is also very important. The claws should not be too big or too small than the doll. The big paw grabs the little doll, and the doll will leak out of the loot. 3, the doll must have a relatively large support surface. When using the skill of spring claws, it is necessary to estimate where the support surface of one of the claws is when the lower claws are. This is a necessary condition for backing the claws backwards. If you cannot clearly judge the support surface, do not use this skill. 4, the other two claws should be caught on both sides. After finding the support surface, if the other two claws did not grab the dolls on both sides of the doll, or that it was difficult to grab the two sides, it was also failed in this case, because this doll could not be mentioned. 5, the doll caught should not be too soft. The too soft doll, the claws on the support surface are directly fell down, the elasticity will be much worse, and it also limits the use of this skill and the effect is not good.
Universal skills
1. The so -called choice of a doll machine to choose a doll machine is to observe the location of the doll in the machine. The principle of the nearest principle should be found. There is no squeezing around the lying, and the baffle is basically not tight to the baffle or glass.
2, the countdown of time is over, and naturally falls. Generally, the doll machine will have countdown with a period of 30 seconds. It is found that when the countdown is over, the probability of success in the natural whereabouts of the paw is relatively high. When the claws naturally getting the doll, this opportunity is very important.
3, the test claw force starts to invest one or two to try the strength of the claws, that is, after the coin is invested, shake the hand rod that controls the direction, and the swing of the paw is not large. If the shaking is very powerful, the weak claws are more difficult to grab. If the shaking is not powerful, even the straightforward is not much, the probability of success is relatively high.
4, do not catch the doll with the center of gravity. Many times, when we did not catch the doll, as soon as the paws were delivered, the doll was not the original posture. Because the doll is down or vertically, it is difficult to judge the center of gravity, and it will also reduce the probability of the success of the claw card doll.
The expansion information
The minimum requirements for the height of the stacking height of the dolls of the doll
1. This is the environmental condition that can be used to use spring claw skills, because the height of the hole baffle is more than doubled than the doll, and the chance of dolls from being thrown out is small.
2, the size of the doll should match the size of the paw. Yes, this one is also very important. The claws should not be too big or too small than the doll. The big paw grabs the little doll, and the doll will leak out of the loot.
3, the doll must have a relatively large support surface. When using the skill of spring claws, it is necessary to estimate where the support surface of one of the claws is when the lower claws are. This is a necessary condition for backing the claws backwards. If you cannot clearly judge the support surface, do not use this skill.
4, the other two claws should be caught on both sides. After finding the support surface, if the other two claws did not grab the dolls on both sides of the doll, or that it was difficult to grab the two sides, it was also failed in this case, because this doll could not be mentioned.
5, the doll caught should not be too soft. The too soft doll, the claws on the support surface are directly fell down, the elasticity will be much worse, and it also limits the use of this skill and the effect is not good.