5 thoughts on “How to prepare puppy before production?”
Guadalupe
Need to prepare the following tools:
1, prepare production box:
production box nails, or instead of hard cardboard boxes, long, wide, and high to make the mother the mother It is convenient for dogs to produce babies and breastfeeding. At the edge of one side of the box, a gap should be dug to facilitate the entry and exit of dog dogs. Soft pads should be placed in the production box, such as short grass and broken cloth. Put the production box in the female dog 2 days before giving birth.
2, one -time plastic gloves:
Ifly of the consideration of hygiene and personal habits, in theory, we are better to bring gloves to prevent the dog’s mother infection. However, I personally think that if you do n’t have the habit of bringing gloves, do n’t bring it, because we need to move quickly for dogs. If gloves hinder the speed, it is better not to bring. However, be sure to wash your hands with disinfection soap before rubbing the alcohol.
3, alcohol:
It for the disinfection of hand and equipment. The scissors mentioned below requires you to carefully disinfect the blade with wine refined cotton.
4, scissors:
The umbilical cord for cutting new puppy. When giving birth to the dog, after the puppy baby connects the umbilical cord and the placenta from the mother, cut the puppy’s umbilical cord (retain the length of 1-2 cm) with scissors. Cut off the umbilical cord at one time, and the scissors should not be too large. Use it to avoid hurting the baby’s belly.
5, iodine:
is used to disinfect the belly of the puppy belly that just cut the umbilical cord. normal phenomenon. (You ca n’t snore when you see the dog when you see it. Do n’t you do something bad.) After cutting the puppy’s umbilical cord, quickly apply iodine to disinfection and hemostasis.
6, cotton swab: used to dip the iodine for puppies to cut the cord cord and apply iodine.
7, cotton wire or silk wire:
It the navel cord on the belly of the puppy to the puppy, in theory The cotton thread or silk thread is conducive to puppy wound healing.
8. Prepare some warm water for the bitch:
This when dogs have a puppy, it usually lasts for a long time, some take several hours, and they are small Dogs are also a matter of energy consumption, so the dog must supplement the dog to supplement the dog. You need to prepare a bottle of warm water. Where you can reach your tentacle, give the dog a little water in the gap between the puppy.
9. Heating water bag:
This is necessary to prepare when having a puppy in winter, because the puppy’s insulation ability is very low, they must rely on the dog mother to maintain In body temperature, before the dog’s mother was completely born, you need a warm water bottle and help the puppy to keep the temperature. But don’t get hot, so as not to burn puppy. We feel warm (40 ~ 50 degrees) in our hands.
10, prepare a large amount of hand paper or clean, water -absorbing power rag:
This mentioned earlier, dogs are not very clean, and follow In the process of giving birth to a puppy, the dog mother will bleed and have body fluids. (My mother pudding is vomiting), so when you take it for the dog, you especially need these things and wipe here and wipe it. Essence
The expansion information:
The precautions for postpartum care of dogs
1. After delivery, the female dog should immediately use warm water and towels to use the vulva, the vulva, and the vulva, and the vulva, Wipe the tail and breasts and replace a clean cushion. Generally, bitch will bring their children, so don’t worry too much. Just look at it at night, don’t let the bitch press the puppy.
2, declined to visit strangers, parents should not touch or catch dogs with their hands, otherwise, the female dogs will attack the onlookers and even eat dogs.
3, don’t worry about the mother dog for about a few hours after giving birth, and the appetite for 3 days after delivery is normal. If the dog mother does not eat in the day after delivery, she can drink some goat milk powder to supplement nutrition.
The daily feeding female dogs to feed high -quality and digestible foods but the amount should be less. You can feed some yogurt and mix with dog food, feed a boiled egg yolk every day, or drink a little bit of drinking a little bit. Bone soup promotes the production of milk; you can also buy some spoils for high -soluble calcium, which can supplement a variety of vitamins, calcium and 12 trace elements at the same time, and the nutrition is quite comprehensive.
4. Pay attention to the breastfeeding of dogs. If the female dog does not return for a long time or the dog is screaming for a long time, it may be a manifestation of the female dog without milk or illness. You can buy a bottle, charge milk powder for puppies to drink, you can buy pet puppies and cats for milk powder. The ingredients are closer to breast milk. The puppy loves to drink, and it can also supplement a lot of nutrition for the little guys.
5. Do a good job of anti -freezing and insulation. In winter, the temperature of the delivery room is low. To increase grass, conditions can be heated with infrared heater and infrared lights.
You need to prepare the following tools: 1. Preparing the production box: -made box nails, or instead of hard cardboard boxes, long, wide, and high it is good. At the edge of one side of the box, a gap should be dug to facilitate the entry and exit of dog dogs. Soft pads should be placed in the production box, such as short grass and broken cloth. Put the production box in the female dog 2 days before giving birth. 2, one -time plastic gloves: Ifly of health and personal habits, in theory, we are better to bring gloves to prevent the dog’s mother infection. However, I personally think that if you do n’t have the habit of bringing gloves, do n’t bring it, because we need to move quickly for dogs. If gloves hinder the speed, it is better not to bring. However, be sure to wash your hands with disinfection soap before rubbing the alcohol. 3, alcohol: The disinfection of hand and equipment. The scissors mentioned below requires you to carefully disinfect the blade of the blade with alcohol cotton. 4, scissors: The umbilical cord for cutting new puppies. When giving birth to the dog, after the puppy baby connects the umbilical cord and the placenta from the mother, cut the puppy’s umbilical cord (retain the length of 1-2 cm) with scissors. Cut off the umbilical cord at one time, and the scissors should not be too large. Use it to avoid hurting the baby’s belly. 5, iodine: The disinfection of the belly of puppies that just cut the umbilical cord. When the umbilical cord is cut off, it will bleed. Don’t be afraid. This is normal. (You ca n’t snore when you see the dog when you see it. Do n’t you do something bad.) After cutting the puppy’s umbilical cord, quickly apply iodine to disinfection and hemostasis.
What are the need for dog production? First of all, dog production should prepare production utensils in advance: production boxes, clean towels, disposable gloves, scissors, alcohol, cotton threads, cotton sticks, disinfection pots, washbasins, warm water, toilet paper, etc. It is best to have insulation equipment (bulb, electric blanket, hot water bag, etc.) during winter production. Secondly, if the owner does not have experience, it is best to have a few prenatal inspections to determine the production date in order to be sent to the hospital in time
First of all, the owner needs to have a sense of pregnancy before giving birth to take a dog to a professional pet hospital for X -rays or abdominal B -ultrasound to judge the health and number of the fetus. Determine whether the dog may be difficult to give birth through fetal positions. Secondly, you need to prepare the production house in advance to let the dog familiarize with the birth room environment in advance. Furthermore, because the dog consumes much energy during the production process, the owner needs to prepare some cans and nutrition cream in advance, so that the dog can replenish the dog in a short time. Finally, toilet paper, cotton wires, scissors, electric blankets and other substances need to be prepared. Cotton wires and scissors can be used when the dog is ligated after the dog is produced. Electric blankets or other heating items can be kept warm after the dog is produced. In addition, the owner also needs to prepare a pet -dedicated goat milk powder in advance.
1. Paping: A comfortable nest, and clean towels, scissors, threads, cotton, disinfection potion (iodine), washbasin, old newspapers. It is best to have insulation equipment (bulbs, electric blankets, thick towels, etc.) during winter production.
2. The contact with veterinarians: For dog species with high difficulty for yields (such as Chihuahua, Bomei, Bulberry, Bullette, etc.), for the poorly produced experience, it is best to cause it Physician takes students. Several prenatal inspections should be performed before production, and the date of production is known in advance in order to be sent to the hospital in time. It is best to understand the entire production process for the owners who want to produce at home, and ask the doctor to ask the doctor to assist the reception.
3. Energy supplement: The bitch may not have physical strength during the production process. In order to supplement the required energy at any time, you can prepare nutritional and digestible foods, and feed at the production interval time. Before production, shave the hairs of the bitch nipples and vulva.
Need to prepare the following tools:
1, prepare production box:
production box nails, or instead of hard cardboard boxes, long, wide, and high to make the mother the mother It is convenient for dogs to produce babies and breastfeeding. At the edge of one side of the box, a gap should be dug to facilitate the entry and exit of dog dogs. Soft pads should be placed in the production box, such as short grass and broken cloth. Put the production box in the female dog 2 days before giving birth.
2, one -time plastic gloves:
Ifly of the consideration of hygiene and personal habits, in theory, we are better to bring gloves to prevent the dog’s mother infection. However, I personally think that if you do n’t have the habit of bringing gloves, do n’t bring it, because we need to move quickly for dogs. If gloves hinder the speed, it is better not to bring. However, be sure to wash your hands with disinfection soap before rubbing the alcohol.
3, alcohol:
It for the disinfection of hand and equipment. The scissors mentioned below requires you to carefully disinfect the blade with wine refined cotton.
4, scissors:
The umbilical cord for cutting new puppy. When giving birth to the dog, after the puppy baby connects the umbilical cord and the placenta from the mother, cut the puppy’s umbilical cord (retain the length of 1-2 cm) with scissors. Cut off the umbilical cord at one time, and the scissors should not be too large. Use it to avoid hurting the baby’s belly.
5, iodine:
is used to disinfect the belly of the puppy belly that just cut the umbilical cord. normal phenomenon. (You ca n’t snore when you see the dog when you see it. Do n’t you do something bad.) After cutting the puppy’s umbilical cord, quickly apply iodine to disinfection and hemostasis.
6, cotton swab: used to dip the iodine for puppies to cut the cord cord and apply iodine.
7, cotton wire or silk wire:
It the navel cord on the belly of the puppy to the puppy, in theory The cotton thread or silk thread is conducive to puppy wound healing.
8. Prepare some warm water for the bitch:
This when dogs have a puppy, it usually lasts for a long time, some take several hours, and they are small Dogs are also a matter of energy consumption, so the dog must supplement the dog to supplement the dog. You need to prepare a bottle of warm water. Where you can reach your tentacle, give the dog a little water in the gap between the puppy.
9. Heating water bag:
This is necessary to prepare when having a puppy in winter, because the puppy’s insulation ability is very low, they must rely on the dog mother to maintain In body temperature, before the dog’s mother was completely born, you need a warm water bottle and help the puppy to keep the temperature. But don’t get hot, so as not to burn puppy. We feel warm (40 ~ 50 degrees) in our hands.
10, prepare a large amount of hand paper or clean, water -absorbing power rag:
This mentioned earlier, dogs are not very clean, and follow In the process of giving birth to a puppy, the dog mother will bleed and have body fluids. (My mother pudding is vomiting), so when you take it for the dog, you especially need these things and wipe here and wipe it. Essence
The expansion information:
The precautions for postpartum care of dogs
1. After delivery, the female dog should immediately use warm water and towels to use the vulva, the vulva, and the vulva, and the vulva, Wipe the tail and breasts and replace a clean cushion. Generally, bitch will bring their children, so don’t worry too much. Just look at it at night, don’t let the bitch press the puppy.
2, declined to visit strangers, parents should not touch or catch dogs with their hands, otherwise, the female dogs will attack the onlookers and even eat dogs.
3, don’t worry about the mother dog for about a few hours after giving birth, and the appetite for 3 days after delivery is normal. If the dog mother does not eat in the day after delivery, she can drink some goat milk powder to supplement nutrition.
The daily feeding female dogs to feed high -quality and digestible foods but the amount should be less. You can feed some yogurt and mix with dog food, feed a boiled egg yolk every day, or drink a little bit of drinking a little bit. Bone soup promotes the production of milk; you can also buy some spoils for high -soluble calcium, which can supplement a variety of vitamins, calcium and 12 trace elements at the same time, and the nutrition is quite comprehensive.
4. Pay attention to the breastfeeding of dogs. If the female dog does not return for a long time or the dog is screaming for a long time, it may be a manifestation of the female dog without milk or illness. You can buy a bottle, charge milk powder for puppies to drink, you can buy pet puppies and cats for milk powder. The ingredients are closer to breast milk. The puppy loves to drink, and it can also supplement a lot of nutrition for the little guys.
5. Do a good job of anti -freezing and insulation. In winter, the temperature of the delivery room is low. To increase grass, conditions can be heated with infrared heater and infrared lights.
You need to prepare the following tools:
1. Preparing the production box:
-made box nails, or instead of hard cardboard boxes, long, wide, and high it is good. At the edge of one side of the box, a gap should be dug to facilitate the entry and exit of dog dogs. Soft pads should be placed in the production box, such as short grass and broken cloth. Put the production box in the female dog 2 days before giving birth.
2, one -time plastic gloves:
Ifly of health and personal habits, in theory, we are better to bring gloves to prevent the dog’s mother infection. However, I personally think that if you do n’t have the habit of bringing gloves, do n’t bring it, because we need to move quickly for dogs. If gloves hinder the speed, it is better not to bring. However, be sure to wash your hands with disinfection soap before rubbing the alcohol.
3, alcohol:
The disinfection of hand and equipment. The scissors mentioned below requires you to carefully disinfect the blade of the blade with alcohol cotton.
4, scissors:
The umbilical cord for cutting new puppies. When giving birth to the dog, after the puppy baby connects the umbilical cord and the placenta from the mother, cut the puppy’s umbilical cord (retain the length of 1-2 cm) with scissors. Cut off the umbilical cord at one time, and the scissors should not be too large. Use it to avoid hurting the baby’s belly.
5, iodine:
The disinfection of the belly of puppies that just cut the umbilical cord. When the umbilical cord is cut off, it will bleed. Don’t be afraid. This is normal. (You ca n’t snore when you see the dog when you see it. Do n’t you do something bad.) After cutting the puppy’s umbilical cord, quickly apply iodine to disinfection and hemostasis.
What are the need for dog production? First of all, dog production should prepare production utensils in advance: production boxes, clean towels, disposable gloves, scissors, alcohol, cotton threads, cotton sticks, disinfection pots, washbasins, warm water, toilet paper, etc. It is best to have insulation equipment (bulb, electric blanket, hot water bag, etc.) during winter production. Secondly, if the owner does not have experience, it is best to have a few prenatal inspections to determine the production date in order to be sent to the hospital in time
First of all, the owner needs to have a sense of pregnancy before giving birth to take a dog to a professional pet hospital for X -rays or abdominal B -ultrasound to judge the health and number of the fetus. Determine whether the dog may be difficult to give birth through fetal positions. Secondly, you need to prepare the production house in advance to let the dog familiarize with the birth room environment in advance. Furthermore, because the dog consumes much energy during the production process, the owner needs to prepare some cans and nutrition cream in advance, so that the dog can replenish the dog in a short time. Finally, toilet paper, cotton wires, scissors, electric blankets and other substances need to be prepared. Cotton wires and scissors can be used when the dog is ligated after the dog is produced. Electric blankets or other heating items can be kept warm after the dog is produced. In addition, the owner also needs to prepare a pet -dedicated goat milk powder in advance.
1.
Paping: A comfortable nest, and clean towels, scissors, threads, cotton, disinfection potion (iodine), washbasin, old newspapers. It is best to have insulation equipment (bulbs, electric blankets, thick towels, etc.) during winter production.
2.
The contact with veterinarians: For dog species with high difficulty for yields (such as Chihuahua, Bomei, Bulberry, Bullette, etc.), for the poorly produced experience, it is best to cause it Physician takes students. Several prenatal inspections should be performed before production, and the date of production is known in advance in order to be sent to the hospital in time. It is best to understand the entire production process for the owners who want to produce at home, and ask the doctor to ask the doctor to assist the reception.
3.
Energy supplement: The bitch may not have physical strength during the production process. In order to supplement the required energy at any time, you can prepare nutritional and digestible foods, and feed at the production interval time. Before production, shave the hairs of the bitch nipples and vulva.